Racquet Selection Map 2007
Our exclusive Racquet Selection Map enables you to help your customer choose a racquet with “at-a-glance” ease. The entire performance racquet universe is presented on one easily navigable grid that instantly locates each racquet compared to every other in terms of power, control, and maneuverability.
Simply locate the specs of your customer’s current racquet on the map. From this starting point, move outward in large or small increments in the direction of the customer’s primary preference — relatively more or less power, control or maneuverability. Once you have zoomed into an approximate location on the grid, you can narrow down the racquet’s feel attributes by choosing from length, size, and flex specs coded into the racquet number. Look up the racquet(s) by number in the accompanying table and send your customer out the door with a handful of “choice customized” demos. This procedure eliminates player’s doubt and second-guessing, minimizes buyer’s remorse, creates a satisfied customer, and leads to more profits. But the Racquet Selector won’t work for you unless you let it. Post it on the wall as a tool for the whole world to see and use. And then, look out!
Racquet Selection Map Key
- Power/Control (columns). (formula = length index x headsize x flex x swingweight) ÷ 1000. Length index calculation: 27” = 1.0, 27.5” = 1.05; 28” = 1.1, etc.
- Maneuverability (rows). RDC (Babolat Racquet Diagnostic Center) swingweight units.
- Racquet ID. The number in the grid correlates to the accompanying racquet list.
- Headsize. Midsize and midplus (≤104 sq. in.) have no indicator. Oversize (105-117 sq. in.) = •. Superoversize (≥ 118 sq. in.) = :.
- Length. x = extended length. Standard length (27”) racquets have no indicator.
- Flex (RDC). a = < 60; b = 60-64; c = 65-69; d = 70-74; e = > 74. The higher the number, the stiffer the racquet.
- Company. Coded by number and color. See accompanying racquet list on the following pages.
- Racquet Quadrants and the Center of the Racquet Universe. The center of the racquet universe is located at the intersection of the two red lines. Approximately half the racquets lie to the right and left, and half above and below these lines. The lines divide the racquet universe into four color-coded quadrants — clockwise from top left: (1) quick power, (2) quick control, (3) stable control, (4) stable power. These characterizations provide a general vocabulary for comparing racquets.
- Racquet Finder List. The racquet list accompanying the map identifies each racquet and gives additional information. The map provides specific (very narrow ranges, anyway) swingweight, flex and power statistics, and general size and length characteristics. The racquet list specifies the length and size and further specifies weight, balance, and price.
How To Use It
- Ask questions. What are you looking for that your current racquet does not provide? What do you like most and least about your current racquet? What are the strengths and weaknesses of your game?
- Locate current racquet on map. If the racquet is not in the list, take measurements.
- Locating potential racquets. Depending on the answers to the above questions, draw an imaginary arrow (a wide or skinny one) from your present racquet in the desired direction for power and maneuverability.
- Narrowing the field. Shrink the choices using the length, headsize, and flex codes to match customer preferences.
- Selecting racquet demos. Once the choices are narrowed, locate the racquets by number in the racquet list.
TI magazine search
TI magazine articles
- Playtest: Tecnifibre XR3 17
- Our Serve: Mainstream Marketing
- Industry news
- RacquetTech: Two-Piece Stringing without a Starting Knot
- Inventory Management: Select the Right Gear to Stay Competitive
- USTA: Catching Up With New USTA President Katrina Adams
- Footwear: The In-Store Advantage
- Court Construction & Maintenance Guide: The Hard Facts
- Serious Propositions